SCHNEIDER VW3A3310D Output module

Schneider VW3A3310D Overview

The Schneider Electric VW3A3310D is a braking resistor designed for use with Schneider Electric variable frequency drives (VFDs). Braking resistors are used to dissipate the regenerative energy generated during rapid motor deceleration or braking, preventing overvoltage tripping of the VFD. The "D" in the model number may indicate a specific resistance value or power rating.

Product Detailed Description

• Function:

• Converts the regenerative energy generated by the motor during braking or rapid deceleration into thermal energy and dissipates it.

• Prevents the VFD from tripping due to excessive regenerative voltage, ensuring stable system operation.

• Allows for faster deceleration and higher braking torque.

• Features:

• Robust industrial design to withstand vibrations and shocks in industrial environments.

• Adequate heat dissipation capacity to safely dissipate regenerative energy.

• May include overtemperature protection devices to prevent the resistor from overheating and being damaged.

• Typically has a defined resistance value and power rating.

• Designed for compatibility with specific Schneider VFD series.

Product Parameters

As the specific model suffix (e.g., VW3A3310D) indicates particular configurations, the following are some typical parameters for braking resistors. Always refer to the official datasheet for the specific model for accurate parameters:

• Resistance Value (R):

• Measured in ohms (Ω), determines the rate of energy dissipation.

• Rated Power (P):

• Measured in watts (W), indicates the maximum power the resistor can continuously dissipate.

• Peak Power Capability:

• Indicates the maximum power the resistor can withstand for a short period.

• Operating Voltage (U):

• Indicates the maximum voltage at which the resistor can operate safely.

• Degree of Protection (IP):

• Indicates the level of protection of the resistor housing against solid particles and liquids.

• Cooling Method:

• Natural cooling or forced air cooling.

• Mounting Method:

• E.g., panel mounting or DIN rail mounting.

• Connection Method:

• E.g., screw terminals.

• Overtemperature Protection:

• Whether a thermal switch or thermal protector is built-in.

Product Advantages

• Prevents VFD Overvoltage:

• Ensures the VFD does not trip due to excessive regenerative energy during braking, improving system reliability.

• Improves Braking Performance:

• Allows for faster deceleration and higher braking torque, improving the response speed and control accuracy of the machine.

• Protects VFD and Motor:

• Effectively dissipates regenerative energy, protecting the VFD and motor from overvoltage damage.

• Adapts to Different Application Needs:

• Available in different resistance values and power ratings to suit various motor and braking requirements.

• Compatible with Schneider VFDs:

• Specifically designed for use with Schneider VFDs, ensuring good compatibility.

Precautions

• Correct Selection:

• Select the appropriate braking resistor with the correct resistance value and power rating based on the VFD model, motor power, braking requirements, and duty cycle. Refer to the Schneider VFD selection manual.

• Correct Installation:

• Install the braking resistor in a well-ventilated, non-flammable area, ensuring sufficient space for heat dissipation.

• Avoid covering or obstructing the resistor.

• Correct Wiring:

• Connect the braking resistor correctly according to the VFD wiring diagram.

• Overtemperature Protection:

• If the resistor has an overtemperature protection device, ensure it is wired correctly so that it can trigger an alarm or stop the system in case of overheating.

• Safe Operation:

• The surface of the resistor may become hot during operation. Do not touch it to prevent burns.

• Regular Inspection:

• Regularly inspect the resistor's connections and appearance, ensuring there is no damage or loosening.

Product Applications

Schneider VW3A3310D or similar braking resistors are widely used in industrial applications that require frequent braking or rapid deceleration, including but not limited to:

• Lifting Equipment:

• Overhead cranes, tower cranes, and other equipment requiring precise braking and positioning.

• Conveyor Systems:

• Conveyor belts with frequent starts and stops.

• Packaging Machinery:

• Packaging equipment requiring fast and precise motion control.

• Machine Tools:

• Rapid deceleration and positioning of spindles.

• Centrifuges:

• Rapid deceleration to shorten cycle times.

• Test Benches:

• Test equipment requiring simulation of various braking conditions.

• Wind Turbines:

• Braking control of the blades.

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Related products:

E-mail: alex@fenoux.com

Tel.: +86 13338369201

Skype: +86  13338369201

WhatsApp: +86  13338369201